SET
SET
SET
▲
▲
▼
▲
▲
SET
SET
SET
CHANGING PROGRAM
CHANGE menu could be reached by pressing ▲ button in PROG sub-menus.
NOTE: If there is no program on the memory, CHANGE menu does not exist.
SET button is pressed on CHANGE menu. The programs that has been
set before, appear on the screen with using the direction buttons
respectively.
SET button is pressed on desired program to change.
The program operation mode is
selected as astronomical or time
switch.
Astronomical mode
After making choice for the last day
of the week, program could be stored
with selecting SAVE or could be
cancelled with selecting EXIT.
+ OFFSET : This parameter is used to adjust the program operation time.
OFFSET is added to sunrise or sunset time
- OFFSET : This parameter is used to adjust the program operation time.
OFFSET is subtracted from sunrise or sunset time
If timer mode is selected,
hour,minute and second
values are entered
respectively.
Sunrise or Sunset is set
If it is desired,OFFSET would be
adjusted.
For related program, desired relay output is
selected.
Required contact position is selected as ON
or OFF
If YES is selected, program
operation is enabled for flashing
day.
If NO is selected, program is not
used for flashing day.
This process is repeated for each
day of the week.
▲
A
B
A
B
SET
If ALL is selected, program operation is
enabled for every day. If SELECT is selected,
program operation is enabled for desired days.
▼
▲
▼
▲
▼
▲
SET
SET
SET
SET
Time mode
A
B
A
B
SET
SET
▲
▲
▲
▲
▲
SET
SET
SET
SET
Monday
Monday
SET
SET
