background image

16

 | Kaden 

Wired Controller Manual

WEEKLY timer operation

To deactivate WEEKLY TIMER function

Press the TIMER button while 

 disappears from the  

LCD screen.

To activate WEEKLY TIMER function 

Press the TIMER button while 

 is displayed on the  

LCD screen.

TIMER

To turn off the air conditioner during the weekly timer

1.   If you press the POWER button once and quickly, the air 

conditioner will turn off temporarily. And the air conditioner 
will turn on automatically until the time of On timer.

 

 Example: If you press the POWER button once and quickly 
at 10:00, the air conditioner will turn on at 14:00.

2.   When you press the POWER button for 2 seconds, the air 

conditioner will turn off completely.

ON

OFF

ON

OFF

8:00

12:00

14:00

17:00

10:00

To set the DAY OFF (for a holiday)

4.   The DAY OFF can be set for other days by repeating  

steps 2 and 3.

1.   During the weekly timer, press the CONFIRM button.

CONFIRM

2.  Press the button “+” or “–” to select the day in the week.

Note

•  To cancel: Follow the same procedures as those for 

setup.

•  The DAY OFF setting is cancelled automatically after the 

set day has passed.

3.  Press the DAY OFF button to set the DAY OFF.

DELAY/DAY OFF

ex.The DAY OFF is set for Wednesday

The       mark is hidden

5.   Press the BACK button to go back to the weekly timer.

BACK

Содержание KD Series





















Отзывы: