4
concerning power and/or grounding should be directed toward a certified electrician or an
authorized Products service center.
Reversing the Door Swing of Your Appliance
This appliance has the capability of the door opening from either the left or right side. The unit is
delivered to you with the door opening from the left side. Should you desire to reverse the opening
direction, please call service for reversal instructions
.
OPERATING YOUR WINE CHILLER
The Wine Chiller should be placed in where the ambient temperature is between 32-95 degrees
Fahrenheit(0-35
℃
). If the ambient temperature is above or below this range, the performance of the unit
may be affected. For example, placing your unit in extreme cold or hot conditions may cause interior
temperatures to fluctuate. The range of setting temperatures may not be reached.
KA110WR
＆
KSJ168EW
ON/OFF Power and memory function
To turn the Wine chiller ON or OFF, press and hold the power button for 2 seconds. The LED readout
will show the last set temperature.
Setting the Temperature Control
You can alter the temperature display setting from Fahrenheit to Celsius by pressing the ºF /
℃
button.
The Fahrenheit (F) or Celsius(C) will light up to indicate the set scale.
You can control the internal temperature by pressing the UP or DOWN arrow buttons.
The temperature will increase or decrease 1
℃
for every press of the UP or DOWN arrow buttons.
The set temperature will be displayed on the LCD display.
Red wines
The temperature needs to be set at 15~18
℃
(58~65 ºF) and the LED lamp under “RED” will be lit.
White wines
The temperature needs to be set at 9~14
℃
(48~57 ºF) and the LED lamp under “WHITE” will be lit.
Sparkling wines
The temperature needs to be set at 5~8
℃
(40~47 ºF) and the LED lamp under “SPARKL” will be
lit.
NOTE:
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the Wine Chiller will not start.
When you use the Wine Chiller for the first time or restart the Wine Chiller after having been shut off
for a long time, there could be a few degrees variance between the temperature you select and the one
indicated on the LED readout. This is normal and it is due to the length of the activation time. Once
