Kaco blueplanet 3.0 NX1 M2 Скачать руководство пользователя

Страница: 3 / 28

Page 1 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2

KACO blueplanet 5.0 NX1 M2

NX1 Setup app

1.1

App download

The app is available to download on Apple App Store and Google Play Store (currently the app for Android is only available

for download on KACO website under the software download section of the NX1 inverters. It will be available in Play Store

soon).
The app can be searched by the name “KACO NX1 Setup”. Once installed it will appear as “KacoTool” on the smartphone

(Android and iOS). The app is compatible with Android Oreo 8.0 and higher, and with Apple iOS 11 and higher.

WLAN Network Configuration

2.1

Authorization

The app will automatically connect to the Wi-Fi Stick hotspot via SSID and password in QR code, so the app needs certain

permissions to access the device of smart phone (Android and iOS) as below:



Access the device of smart phone.

1 Photo and media permission.

2 Location permission.

3 Device information permission.

4 Picture and video permission

5 Location service.

ceed with network configuration

Fig. 1:

Photo and media permission

Fig. 2:

Device information permission

Fig. 3:

Location permission

Содержание blueplanet 3.0 NX1 M2





























Результаты поиска

Содержание blueplanet 3.0 NX1 M2

Отзывы:

Похожие инструкции для blueplanet 3.0 NX1 M2

Бренды по названию

Популярные бренды

Kaco blueplanet 3.0 NX1 M2, Быстрое руководство по установке

Результаты поиска

Содержание blueplanet 3.0 NX1 M2

Отзывы:

Похожие инструкции для blueplanet 3.0 NX1 M2

Бренды по названию

Популярные бренды