Kaco 1001732 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 83

Kaco 1001732 Скачать руководство пользователя страница 13

5

Transportation and Delivery

Every product leaves our factory in perfect electrical and mechanical condition. Special packaging ensures that the
devices are transported safely. The shipping company is responsible for any transport damage that occurs.

5.1

Scope of delivery

Bidirectional feed-in inverter

Mount

Installation kit

1 insulating tube (for interface cables)

Check the equipment included

1. Inspect the device thoroughly.

2. Immediately notify the shipping company in case of the following:

– Damage to the packaging that indicates that the device may have been damaged.

– Obvious damage to the device.

3. Send a damage report to the shipping company immediately.

4. The damage report must be received by the shipping company in writing within six days following receipt of the

device. We will be glad to help you if necessary.

5.2

Transporting the device

CAUTION

Hazard due to impact; risk of breakage to the device!

›

Pack the device securely for transport.

›

Transport the device using the intended carrying handles of the packaging box.

›

Do not expose the device to any shocks.

For safe transportation of the product, use the hand recesses in the carton.

Fig. 5:

Transporting the device

Device version

Dimensions HxWxD

Total weight
including
packaging

50.0TL3-S B1 WM
OD IIGB

818x591x537 mm

78 kg

50.0TL3-S B1 WM
OD IIGM

818 x 591 x 537 mm

79 kg

50.0TL3-S B1 WM
OD IIGL

818 x 591 x 537 mm

83 kg

50.0TL3-S B1 WM
OD IIGX

818 x 591 x 537 mm

84 kg

5.3

Installation tool

The codes given in the table below are used in all usage instructions for assembly/installation/maintenance and disas-
sembly for the tools and tightening torques being used.

KACO blueplanet gridsave 50.0TL3-S

Page 13

EN

«
...
11
12
13
14
15
...
»

Содержание 1001732




















































































Отзывы:

Нет отзывов