MDM2010 – ILB3210 Installation Guide
19 |
P a g e
3.3 Terminal Certification
Click “Next” and click “Start Certification” to
start the certification process. This process will
reach completion automatically.
!
Note: With effect from 19 October 2020, the
certification process has been turned on to
ensure that the antenna is properly aligned to
the satellite before it can come online.
Once the certification is successful, you will see
the message “Certification passed”.
If certification fails, return to Section 3.2.3
above to fine-tune the azimuth and elevation
to obtain a better EsNo.
