9
10
—Removal—
The shield ratchet appears when the shield is completely removed.
<Shield Ratchet>
Remove the shield.
（
See
2
. Shield
）
Remove the collar screw using a
hexagonal wrench (4 mm). (Figure 1)
Remove the hook on the underside of
the shield ratchet from the shield
ratchet mounting hole. (Figure 2)
Do this also for the other side.
①
②
③
④
—Attaching—
Check the direction of the shield
ratchet and the collar. (Figure 1)
Insert the shield ratchet (L) hook into
the mounting port on the left side of
the helmet to mount the collar (L).
Mount the shield ratchet with the collar
screw using a hexagonal wrench
(4 mm).
①
②
③
（Fig.1）
（Fig.2）
Hexagonal Wrench
Hexagonal Wrench
Collar
Collar
Collar
Screw
Collar
Screw
Shield Ratchet
Shield Ratchet
Shield Ratchet
Shield Ratchet
Shield
Ratchet
Mounting
Hole
Shield
Ratchet
Mounting
Hole
CAUTION!
Use the proper tools otherwise the collar screws and its peripheral parts may
be damaged.
* The collar has an engraving of
right = R, left = L.
Left
（
L
）
Right
（
R
）
（Fig.1）
（Fig.3）
Shield Ratchet
Collar
Collar
Collar Screw
Shield Ratchet
（Fig.2）
Chin Cover
Shield Ratchet (L)
Collar (L)
Collar Screw
Hook
hexagonal
wrench
(4 mm)
Tightening the collar screw more
than necessary can damage the
part.
Use the proper tools otherwise
the collar screws and its
peripheral parts can be damaged.
●
●
When mounting has been
correctly implemented and the
mounting process has ended,
always check that the shield can
be opened and closed correctly.
The collar screw should be
checked regularly for looseness
and tightened.
●
●
WARNING!
CAUTION!
