Kabuto HIKE, Инструкция по эксплуатации

Страница: 22 / 40

Do not leave the helmet in the direct sunlight.
The outer color of the shell may be changed.
THE EFFECTS OF THE DIRECT SUNLIGHT
Matte processing on the surface of this product could be peeled off if the attached sticker is
removed from the surface. To prevent this, never remove the sticker. The same problem may
occur also when other sticker are attached and removed. If you attach stickers on the
product, please be aware of the risk.
CAUTION FOR MATTE COLOR PRODUCT
Be sure to read these instructions.
• This helmet is designed for bicycle use only. Never use the helmet for
purposes or activities other than bicycle riding.
• The helmet should be worn in such a way that it protects your forehead, with
the edge just above your eyebrows, and never pushed far over the back of your
head. Wear the helmet so it is level from front to back.
• No helmet can protect the wearer against all injuries or foreseeable impacts.
• Before riding a bicycle, make sure to adjust the helmet so that it fits your head
correctly. The strap should be positioned not to cover the ears, the buckle
positioned away from the jawbone, and the strap and buckle adjusted to be
both comfortable and secure.
• Your helmet is effective as protection only when it is worn properly.
You should try different sizes to choose the proper size for you with which you
feel secure and comfortable on your head at time of purchase.
• Please handle the helmet with care. The helmet is designed to absorb shock
by partial destruction of the liner and its damage may not be visible. DO NOT
sit on it, drop it on the floor or otherwise cause impact.
• If subjected to a severe impact, the helmet should be discarded and destroyed.
• Wipe the helmet with common ph-neutral detergent diluted with clear water.
Never use any petroleum, thinner, benzine, hot water above 50°C/122ºF or
saline water.
• Do not leave the helmet in the direct sunlight or where the temperature may
surpass 50ºC/122ºF such as in a car or near a heater, and/or avoid leaving in a
humid place for a long time. Doing so will affect the materials and the
performance of the helmet will diminish.
• Do not paint the helmet. Paints may reduce the original protective performance
of the helmet considerably.
• Do not modify the helmet. In order to fully maintain the performance of the
helmet, do not attempt to take it apart or change it in any manner that involves
making holes in it or cutting it (or any of its parts) other than as recommended
by the manufacturer.
• This helmet should not be used by children while climbing or doing other
activities when there is a risk of strangulation/hanging if the child gets trapped
with the helmet.
WARNING
2