Kabuto FARO, Инструкция по эксплуатации

Страница: 14 / 20

Adjusting the XF-3 Adjuster
3
XF-3 Adjuster is a mechanism at the rear of the helmet to keep the helmet from moving. Adjust
the XF-3 Adjuster so it keeps the helmet on your head securely.
First, loosen the XF-3 Adjuster dial, and then put on the helmet. Then, hold the front side of the
helmet against your head and tighten the adjuster dial. (See below)
How to change the position of the Adjust-lock
③
Close the cover when the Adjust-lock is placed properly.
① Hold each strap of the V part and
pull them outward horizontally to
open the cover.
② Move the
Adjust-lock up or
down to change the
position of the
cover.
Adjust-lock
Cover
Strap
Strap
Correct
positions of the
straps
Adjust-lock
Lock the cover securely after changing the position of the adjustment
locks. If the helmet is used without locking the cover securely, the
strap will be loose and the helmet may come off.
Attention!
Adjuster dial
Turn the dial to the left
Loosen Tighten
Turn the dial to the right
How to adjust the XF-3 Adjuster/the adjuster dial
Hold the front side of the helmet
and tighten the XF-3 Adjuster using
the adjuster dial.
Hold the front part and turn the dial.
Be careful with your hair, especially long hair, so it does not get
tangled in the XF-3 Adjuster.
Attention!