har
dw
ar
e k
ey
C
B
lid brackets
16mm
wood screws
E
m4 8mm
screws
p.
3
Ver. 2
W-50531
st
ep 2
7.
8.
attaching lid brackets
5.
6.
B
C
Using the top sets of pre-drilled holes, align with the 2nd, 5th
and 7th holes on the lid brackets (C) and fix to the cabinet using
6 x 16mm wood screws (B) as pictured above.
2 x 31L
side mount pullout bin
Position the door fixing brackets so the elongated holes on
each bracket align with the holes drilled in Step 7. Ensure the
open side of the brackets face inward as pictured above.
Fix the brackets to the door using 4 x 14mm wood screws (F).
Measure from the bottom of door. Mark out and pre-drill four
holes on the back of your cabinet door as pictured above.
Use a 2mm drill bit to pre-drill holes to a depth of roughly 2.5mm.
Carefully slide the guides back into the runners. The runners should
open and close smoothly if assembled correctly. Extend the runners
once they have been correctly reassembled.
36.5mm
36.5mm
305mm
305mm
410mm
410mm
F
F
attaching door brackets
reassembling runners
pre-drilling for door
