st
ep 2
p.
2
Ver. 1
W-50130 / W-50131
Position mechanism so that pegs locate
into 5mm peg holes. Fix with 3 x 38mm
screws each side.
Caution when opening arm.
The arm of this device could spring up and
cause injury. Do not push the arm down
without door attached.
Use included 16mm screws to fix
the door brackets to the door.
Clip door bracket into place on hinge arm.
1.
3.
2.
6.
7.
p.
2
attaching slimline cabinet door lift mechanism
position cabinet drilling
template
pre-drill locator holes
fitting mechanism
fitting door brackets
Position included drilling template on
cabinet sides and mark out drilling
positions. 2 x peg holes (Ø5x5mm) and 3x
screw holes (each side). Refer back page for
actual drilling measurements (if required).
Pre drill 2 x peg holes (Ø5x5mm) and
screw holes.
attaching door
to mechanism
G
F
Pre drill locator holes as marked
5.
pre drill locator holes
E
A
A
Mark out drilling positions for door brackets
on each side of door as per above.
Top of door
4.
mark out drilling positions
for door brackets
An audible
“click”
will be
heard when locked in place.
27
7
6.5
32
F
C
