har
dw
ar
e k
e
y
A
F
H
G
I
J
H
G
I
J
J
p.
4
Ver. 2
W-50532
st
ep 2
attaching door panel
adjusting door panel
11.
12.
Slide the door mount brackets onto the runner brackets (i),
ensuring the height adjustment screws (H) slip into the notches
(ii). Screw through the top and bottom holes of the runner
brackets, ensuring they are as centred as possible, using 4 x M5
16mm screws (J). Next attach the 2 x M5 8mm screws (I) through
the middle holes of each runner bracket.
If required, you can now adjust the door panel by tightening
or loosening the screws as pictured above. Once door
is aligned, tighten the four screws that secure the bin frame
to the runners.
(ii)
(i)
attaching door brackets
pre-drilling for door brackets
9.
10.
Mark out and pre-drill four holes on the inner side of your
cabinet door as pictured above. Use a 2mm drill bit to
pre-drill holes to a depth of roughly 2.5mm.
2 x 27L
side mount pullout bin
40mm
40mm
F
H
Align each door mount bracket (F) with the pre-drilled holes and
fix to the door panel using 4 x 14mm wood screws (G) as pictured
above. Ensure the open side of the bracket faces inward and that
the height adjustment screw hole is facing down.
Half screw the 2 x M6 16mm screws (H) into the height adjustment
holes of the door mount brackets as pictured above.
m5 8mm
screws
m5 16mm
screws
m6 16mm
wood screws
14mm
wood screws
door brackets
20
2mm
20
2mm
298mm
298mm
