Kabola ECOLINE KB Series, Руководство пользователя

Страница: 13 / 29

Instruction manual Kabola KB- Hybrid -Series version 1, 2022
13
To connect the room thermostat for KB Combi
– Calorifier:
➢
Before you connect the room thermostat with Hot Water Switch, use a 4-core insulated wire
0,75 mm2.
➢
Remove the cover of connection A (figure 5) which you can find at the backside of the Kabola
dashboard.
➢
Connect the 4 wires of the room thermostat at T1 and T2 and S3 and B4 in connection A at
the backside of the dashboard as shown on the sticker inside the connector.
➢
Connect the T1 and T2 wires inside the room thermostat (Fig. 6.1) to 2 and 3
➢ The thermostat itself doesn’t have a hot water switch. You can use a connect and disconnect
switch to use this fuel saving function.
➢
Connect the hot water on / off function (S3 & B4) on a connect and disconnect switch.
When the wires are not connected, the hot water function in on.
Be aware that the 3-way valve only opens to the central heating system when the temperature
in the boiler is above the 50 Celsius degrees, this is to avoid that there is condensation in the
boiler.
Figure 12
Figure 6
Figure 6.1
2 3
Figure 6.1
A