Kabola Ecoline Calorifier, Руководство пользователя

Страница: 10 / 32

Instruction manual Kabola KB-Series version 6, 2018
10
Installation KB –Combi:
Figure 2.4
1. Install the feed of the boiler on nr 1
2. Install the return of the boiler on nr 2
3. Install the fill and pressure gauge on nr 4 (see figure 2.3)
4. Install the output (hot water) of the combi on nr
5
5. Install the input (cold water) of the combi on nr 6
4.1.3 Flue gas outlet
GENERAL
The flue gas outlet is an essential part of your heating installation. An incorrect flue gas outlet reduces
the lifespan of your boiler considerably and has a negative impact on the efficiency. Remember when
installing the flue, that even the best boiler won't work properly unless the flue is properly installed.
Warning:
Because the flue gas temperature lies between 150-200°C, it is advisable to
insulate the flue with heat-resistant material on those parts where contact with
human body parts is possible.
For a correct flue gas outlet the following points need to be observed:

Use the proper diameter, use a diameter equal to the diameter of the flue gas outlet on the boiler
(see also technical specification).
 Use double-walled chimney pipe outside to prevent a rapid cooling of the exhaust gasses, which
may result in condensation in the chimney.
Hint:
When using an existing chimney of a larger diameter than the diameter on the
boiler, you can
install flexible piping of the correct diameter insides the
existing chimney.
Warning It is necessary that condensation water always can flow back to the drain of the
boiler, avoid water bags!! The boiler has got a high efficiency, and the burner will
start even when there is no heat demand, this is done to avoid that there is a lot
of condensation in the boiler. Condensation will short the life time of the boiler
1
2
5
6