5
D.
INSTALLING THE LATCH SUPPORT POST
Install the latch support post into
the back of the lock as shown.
For right-hand doors, use hole A.
For left-hand doors, use hole B.
E.
INSTALLING THE TAILPIECE / SPINDLE
E-1
For doors ranging in thickness from 1
3
⁄
8
"
(35 mm) to 1
3
⁄
4
" (44 mm) use the shorter
tailpiece (supplied) and align as shown.
E-2
For doors ranging in thickness from 1
7
⁄
8
"
(48 mm) to 2
1
⁄
2
” (64 mm) use the longest
tailpiece (supplied) and align as shown.
E-3
Make sure the tailpiece/spindle matches
the picture shown depending on the hand
of the lock.
F.
INSTALLING THE LOCK
F-1
Place the rubber gaskets around the lock
body with the lock body sitting into the recessed portion of the gasket.
Assure the holes in the back of the lock and the gasket match.
F-2
If using the cover plate (supplied), place it on the back of the lock
between the gasket and the door (extra length of the cover plate should
be placed so that it is below the unit)
F-3
For doors ranging in thickness from 1
3
⁄
8
" ( 35 mm) to 1
3
⁄
4
" ( 44 mm), use
the shorter mounting screws (supplied) and align as shown
F-4
For doors ranging in thickness from 1
3
⁄
4
" (44 mm) to 2
1
⁄
4
" (57 mm), use
the medium mounting screws (supplied) and align as shown.
F-5
For doors ranging in thickness from 2
1
⁄
4
" (57 mm) to 2
1
⁄
2
" (64 mm), use
the longest mounting screws (supplied) and align as shown.
F-6
Hold the outside and inside units on the door with the tailpiece in the
proper position.
Fit the latch support post in hole A
for a right hand hung door. Use B
for a left hand hung door.
Viewed from
the outside
Door hung on right
spindle should
engage the latch
as above
Door hung on left
spindle should
engage the latch
as above
A
B
Note
: Assurance that the proper
tailpiece/spindle is used is extremely
critical. If the wrong spindle is used,
binding or a lockout can occur.
Note
: If cover plates are used, it may
be necessary to use the next size
screw to mount the lock.
Note
: If cover plates are used, it may be necessary to use the next size
screw to mount the lock.
