1 • CHECKLIST AND EXPLODED VIEWS
PK2915-T 07_2014 E-760/770/790 SERIES RETROFIT INSTALLATION GUIDE
Page 2
Each Generation E-760/770/790 retrofit kit for Unican System 700 locks includes:
(A)
Outside lever handle for electronic override
(B)
Outside housing for electronic override
(C)
Battery holder with 3 AA batteries
(D)
Inside trim assembly
(A1)
Outside lever handle for key-in-knob mechanical override
(B1)
Outside housing for key-in-knob mechanical override
Parts inside hardware bag:
(C1)
Cylinder plug
(D1) Cylinder
(E)
Thumbturn (hex) spindle
(E1)
Cylinder Cap
(F)
Compression spring
(G)
Short square half-spindle (with slotted head)
(H)
Long square half-spindle (with tapered end)
(I)
Torx-head screw
(J)
3 x mounting screws (10-24, 1/8" hex head) or 12-24, 1/8" hex head for recent model only
(K)
1 extension spring
(L)
Additional parts for Office or Storeroom function mortise
Parts available separately:
(M)
Replacement strike and mounting screws
(N)
Light duty drilling jig (part #138-51093)
—
Paper drilling template
Tools Required
Safety glasses
1
/
8
" hex (Allen) key
1
/
16
" hex (Allen) key
3
/
32
" hex (Allen) key
Small flat screwdriver
Torx screwdriver (T-15)
Phillips screwdriver (#2)
1
/
2
" drill bit
Drill
Awl or center punch (if using paper template or mechanical override)
Clamp (if using metal jig)
Cleaning supplies
©
2014 Kaba Ilco, Inc. All trademarks and registered trademarks are the property of their respective owners.
For outdoor installations, order outdoor gasket 033-510181-1 for E-760. For 770/790 Series order gasket 033-512017-1
For doors more than 2
1
/
2
" (63.5mm) thick, order the appropriate hardware bag
to receive the correct length of spindles and mounting screws.
