Kaba E-PLEX 3x65 Deadlatch/Exit Mortise, Руководство по установке

Страница: 4 / 16

4
KABA E-PLEX
®
3x00 SERIES
LIMITED WARRANTY
KABA ACCESS CONTROL WARRANTS THIS PRODUCT TO BE FREE FROM
DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL USE AND SERV-
ICE FOR A PERIOD OF THREE (3) YEARS. KABA ACCESS CONTROL WILL
REPAIR OR REPLACE, AT OUR DISCRETION, E-PLEX 3000 SERIES LOCKS
FOUND BY KABA ACCESS CONTROL ANALYSIS TO BE DEFECTIVE DURING THIS
PERIOD. OUR ONLY LIABILITY, WHETHER IN TORT OR IN CONTRACT, UNDER
THIS WARRANTY IS TO REPAIR OR REPLACE PRODUCTS THAT ARE
RETURNED TO KABA ACCESS CONTROL WITHIN THE THREE (3) YEAR WAR-
RANTY PERIOD.
This warranty is in lieu of and not in addition to any other warranty or condition,
express or implied, including without limitation merchantability, fitness for purpose
or absence of latent defects.
ATTENTION: This warranty does not cover problems arising out of improper
installation, neglect or misuse. All warranties implied or written will be null and
void if the lock is not installed properly and/or if any supplied component part
is substituted with a foreign part. If the lock is used with a wall bumper, the
warranty is null and void. If a doorstop is required, we recommend the use of a
floor secured stop.
The environment and conditions of use determine the life of finishes on Kaba
Access Control products. Finishes on Kaba Access Control products are subject
to change due to wear and environmental corrosion. Kaba Access Control can-
not be held responsible for the deterioration of finishes.
Authorization to Return Goods
Returned merchandise will not be accepted without prior approval. Approvals
and Returned Goods Authorization Numbers (RGA Numbers) for the E-Plex
3x00 Series are available through our Customer Service department in
Winston-Salem, NC (800) 849-8324. The serial number of a lock is required
to obtain this RGA Number . The issuance of an RGA does not imply that a
credit or replacement will be issued.
The RGA number must be included on the address label when material is
returned to the factory. All component parts must be included in the package
with return. All merchandise must be returned prepaid and properly packaged
to the address indicated.