KAARI LOIMU XPOWER, Руководство пользователя

Страница: 5 / 7

KAARI LOIMU XPOWER ™ USER MANUAL
INTRODUCTION
Thank you for purchasing Kaari Loimu XPower ™ Plasma lighter.
Rechargeable, gasless, flameless, electric and environmentally friendly Kaari Loimu
XPower
™ plasma lighter replaces traditional gas and fossil fuel powered lighters
with greener, USB-rechargeable option.
Designed in Finland, Kaari Loimu XPower is the world's first USB-rechargeable
plasma lighter, which also serves as an LED flashlight and a backup power source.
The water, dirt, dust and shock resistant multifunction device makes firing, lighting
and charging easy and safe in all conditions.
USE and RECHARGING
Use of plasma lighter:
The use of Kaari Loimu XPower ™ is simple. Turn the metallic safety pin down, press
the lock switch and open the protective covering cap. Press the upper power switch
on the side of the lighter and put the object in to the plasma arcs. The lighter has
safety function which automatically shuts down the plasma arcs after 7 seconds of
continuous use. After use, close the protective covering cap (make sure the lock
switch fully locks the protective covering cap) and turn the metallic safety pin up.
PLEASE NOTE! Make sure that the protective covering cap is fully closed and the
seal is clean from dirt. This ensures the lighter’s water and dust protection.
Use of LED flashlight:
LED flashlight works only when the protective covering cap is in down position. Press
the lower power switch on the side of the lighter to light it on. Press the power
button again to switch between light modes (low and high) and to shut it down.
Use of backup power supply:
Insert the charging cable into the USB 2.0 port and the other end into the charging
device.