Install exterior assembly
3
STEP
Unlocked
IMPORTANT:
Locked
B
With the latch fully
retracted (in the
unlocked position),
route the cable below
the latch, and insert
the tailpiece through
the slot in the latch.
Remove the spacer
Proceed to next step
A
1-1/2" (38mm)
2-1/8" (54mm)
Measure the diameter of
the hole in the door.
1-1/2" or 2-1/8"
(38 or 54mm)
C
Secure the mounting
plate with the supplied
screws. Do not
overtighten screws.
Keep parallel to
door edge.
Mounting plate
Screws (J)
6
Tailpiece
Before installation, make sure the latch is fully
retracted (in the unlocked position).
