Check front panel and back
panel after installation and
if every parts is connected
well.
Insert front panel connection cable
and mortise connection cable to
corresponding interface on the back
panel, fasten tightly front and back
WIFI connection cables.
Put back surplus length connection cables
into the hole on the door and insert tailpiece
into emergency thumb turn of back panel,
then secure back panel with screws and
load Lithium battery and close battery cover.
Front
panel
connection
cable
interface
Back
WIF
connection
cable
RES
SET
Mortise
connection
cable
interface
Note:
Cut the proper length of break-off screw for
the thickness of the door
