Caution
Tip:Check for safe braking
2)How to start
3)How to stop
4)Product folding
How to use a product
Name of each part
WOLF WARRIOR GT
Ⅲ
Wolf Warrior GT User Manual 08
07 Wolf Warrior GT User Manual
Step1. Turning on the main switch
When turning on the product, you can start driving by turning on the main power switch
first (when using the built-in battery) and turning on the power of the LCD panel. When
driving is finished, turn off the LCD panel and turn off the main power.
* The power of the instrument panel will turn off automatically after a few minutes of
inactivity. At this time, the LED lamp is also turned off, so turn it off with the LED lamp
button when you turn it on again, and turn off the main power switch after use.
Be sure to use the rear brake first for decelerating when stopping while driving. For safe stop, it is necessary to practice slow down after
deceleration with rear brake.
Always use the front and rear brake levers together to stop smoothly and safely after decelerating with the rear brake.
Set the use and strength of the electronic brake among the detailed functions of the instrument panel before driving. When the brake
lever works, the electronic brake works together to increase the braking force.
•For safe braking, check whether the brake lever and disc caliper connection (wire damage, external breakage, etc.) are damaged
before and after driving, and check brake wear and looseness of brake inner core(Inner wire). In the case of hydraulic brakes, it is
also necessary to check the oil leakage or deficiency and always check that the braking force is sufficient.
•Due to various factors such as road surface condition and speed, it may not be possible to stop when brake is operated as
expected. The electronic brake and ABS functions are auxiliary functions to further increase the braking force and used. The user
should understand the function and expect the operation timing when use this function.
Step2. Stance for driving
After tilting the kickstand, find a stable position on the footrest
and then hold the handle grip comfortably. Be careful not to raise
your foot on the rear fender.
Before driving, be sure to check the folding part, the handle part, the part where the Caution main fixing part of the
product is fastened well. And check the position of the fixing slide, the QR lever locking status and the folding part fixing
status.
Throttle malfunction caution
Regardless of whether the throttle is operated or not, the motor sensor may continue to operate, causing malfunctions
such as sudden acceleration. In this case, holding the brake lever to cancel the operation. This phenomenon may be
caused by corrosion of the throttling, immersion of the throttle, disconnection of the magnet, broken off levers, and
breakage of the spring. Do not bounce the throttle lever strongly.
Step3. Acceleration and deceleration
Acceleration can be performed by using the throttle of the
instrument panel while driving, and the deceleration or stop can
be performed by holding the brakes on the handle.
