K9Safety K9Caller, Руководство оператора

Страница: 9 / 16

VAL : Selects between K9 function activation/deactivation
When Activated the Keychain Remote will display.
To Activate/Deactivate the K9 functions:
1. Press and hold Button 5 until the display shows VAL.
· The transmitter will beep six times.
2. Release Button 5.
The LCD panel will play a tone if the K9 functions were activated
and the symbol
“ V" will be displayed.
The transmitter will beep twice and the symbol
“ V" will turn off indicating that the
K9 functions are deactivated.
*Note this function is not available when remote lockout is selected.
C
°
: Call (Hot Alert) Temperature Setting
1. Press and hold Button 5 until the display shows C
°
.
· The transmitter will beep 7 times.
2. Release Button 5.
· The transmitter will beep once.
· The LCD panel will show the Call (Hot Alert) Temperature setting. (Default 95)
The setting can be changed through Feature Programming or via the remote. See
h
°
: Hot Temperature Start Setting
1. Press and hold Button 5 until the display shows h
°
.
· The transmitter will beep 8 times.
Repeat steps 2-4 above.
2. Release Button 5.
· The transmitter will beep once.
· The LCD panel will show the Hot Start Temperature setting. (Default 75)
The setting can be changed through Feature Programming or via the remote. See
Keychain Remote Battery Replacement
The Keychain Remote uses a 1.5 volt AAA alkaline battery, which will require replacement
in time. Although the battery may last up to 3 months before it needs replacement it is rec-
ommended to replace the battery every month.
When the battery needs replacing, the system
’ s operating range will decrease, the LCD dis-
play will show
only one of three bars in the battery icon, or the display and sounds may suddenly stop and
start as the battery voltage drops below minimum. In order to change the battery, first slide
the battery door locking pin to the side. Carefully slide the battery cover downward until it is
free. While replacing the battery make sure that the positive and negative terminals are posi-
tioned correctly, then carefully reassemble the transmitter case.
Remote Button 5 Menu Continued
Page 9