Your K40 system will be ready for use following this automatic wake-up
sequence:
1.
Start your vehicle
– Your K40 system is designed to turn on
automatically every time your vehicle is started.
2.
Listen for Wake-Up Sequence
– Both front and rear alert lights
in your dash will flash (front only radar receiver systems have one
alert light). The voice will announce, “K40 Scan, Active,” then you
will hear alerts for all bands.
NOTE:
If you don’t hear the wake-up sequence, press and release .
3.
GPS Connection
– After locating available satellites, the unit will
announce, “GPS Connected.”
NOTE:
If you are in a location that prevents connection with GPS
satellites (e.g. parking garage), your system will still protect you from
all radar / laser threats. Once you drive to an unobstructed location,
the GPS will connect and you will hear, “GPS Connected.”
4
Wake-Up Sequence
(using factory default settings)
