LASER DEFUSER
FACTORY
MOUNTING
LOCATION
LASER DEFUSER
FACTORY
MOUNTING
LOCATION
LASER DEFUSER
FACTORY
MOUNTING
LOCATION
DIAGRAM C2
4. For proper performance, the Defuser module must be mounted completely level. A module which is posi-
tioned up, down, or to the side by as little as 1° can reduce jamming effectiveness by as much as several
hundred feet (see diagram C2). To assure the Defuser module is properly leveled, insert the rod on the K40
supplied level into the leveling assembly hole located near the middle of the Defuser module (see diagram C3).
Be sure that the vehicle is on a level surface before checking installation.
5. Route the black cable into the trunk. Connect wires per the separate enclosed block diagram sheet.
44678 6/07
DIAGRAM C3
LASER DEFUSER EX
(REAR LICENSE PLATE MOUNT WITH FRAME)
1. Remove the mounting bolts and any existing frame or cover from the license plate. Remove license plate.
2. Position the Laser Defuser EX around the existing rear license plate and mount it against the factory license
plate bracket. Use the existing mounting bolts or K40 supplied nylon bolts to secure the Laser Defuser EX
frame and license plate to the bracket.
On vehicles that have only one set of bracket mounting holes, it is recommended that the Laser
Defuser EX and the license plate be bolted together to eliminate any vibration.
3. For proper performance, the Defuser EX must be mounted completely level. A unit which is positioned up,
down, or to the side by as little as 1° can reduce jamming effectiveness by as much as several hundred feet
(see diagram D1). To assure the Defuser EX is properly leveled, insert the rod on the K40 supplied level into
the leveling assembly hole located on the top of the Defuser EX frame (see diagram D2). Be sure that the
vehicle is on a level surface before checking installation.
4. Use the K40 supplied nylon nuts and bolts to correct either up or down as needed ).
5. Route the black cable into the trunk. Connect wires per the separate enclosed block diagram sheet.
NOTE:
LASER DEFUSER
FACTORY
MOUNTING
LOCATION
LASER DEFUSER
FACTORY
MOUNTING
LOCATION
LASER DEFUSER
FACTORY
MOUNTING
LOCATION
DIAGRAM D1
DIAGRAM D2
