6
of 9
K2 SpeedPorter Installation
Depending on ballast size, position each SpeedPorter with
the appropriate distance and insert the ballast.
Required material: K2 SpeedPorter
Ballasting with K2 Porter:
The L-Profiles are fastened to the rails with the screws and
M K2 slot nut included in the set. Torque: 16 Nm. The
spacing of the L-Profiles depends on the number of bricks
used. The Porters can be positioned both centrally to the
Dome 1000, or laterally to the middle Dome.
Warning: K2 Porters must be mounted so that all base
profiles within a module block are connected.
Materials required: K2 Porter, M K2, bolts with serrated
under head M8x20
BALLASTING THE SYSTEM
Weighted down with ballast using bricks or slabs. Please
follow the guidelines listed on the ballast weight table on
page 16.
Ballasting without additional item(s):
If only light ballasting up to 5 kg is required, insert one brick
directly into the hollow chamber of the Dome S1000.
Ballasting with K2 Short Porter:
The L-Profiles are fastened to the rails with the screws and
M K2 slot nut included in the set. Torque: 16 Nm. The
spacing of the L-Profiles depends on the amount of bricks
used
Materials required: K2 Short Porter, M K2, hexagon socket
countersunk head screw M8x20
15 | 20
Installation of S-Dome System
