6
7
!
The CrossRail can be installed on either side of the Big Foot, but there is a built in shelf for support on the inside of
the Big Foot. To install your CrossRail to the Big Foot, insert the T-Bolt through the slot and into the side channel
of CrossRail. Turn the T-Bolt clockwise ensuring that the mark at the end of the shaft is vertical, indicating proper
alignment. Using a 13 mm socket, tighten to 25.8 ft-lb (35 Nm).
Double check that the alignment marking on the end of the T-Bolt shaft is vertical, indicating proper alignment.
