For Professional Technical Support call 1-844-242-2475 3
19. Before using the pump, check the hose for holes or excess wear, which could cause leaks, and ensure the hose is
not kinked or making sharp angles. A straight hose allows the pump to move the greatest amount of water quickly,
and also check that all hose connections are tight to minimize leaks.
20. This pump is made of high-strength, corrosion-resistant materials. It will provide trouble-free service for a long time
when properly installed, maintained, and used. However, inadequate electrical power to the pump, dirt, or debris
may cause the pump to fail. Please carefully read the manual and follow the instructions regarding common pump
problems and remedies.
PRE-INSTALLATION
APPLICATION
This pump is designed for portable applications. It can drain or remove water from the following: flooded areas, pool
covers, clogged sinks, waterbeds, water basins, boats, stock tanks, etc.
It can also be used to fill tanks or water beds.
This pump has not been tested or approved for use in swimming pools or in salt-water marine areas.
This pump should not be used as a replacement for a sump pump.
SPECIFICATIONS
Power supply
115V, 60 HZ.
Liquid temp. range
32 to 95°F (0 - 35°C)
Discharge connection
3/4 in. garden hose thread connection
Discharge hose needed
5/8 in. or larger discharge garden hose
Power cord
SJTW, 18AWG/3C, 6 ft.
INSTALLATION
1. Priming water
Add water (approximately 1-2 Tbsp.) into the inlet to wet the impeller of the pump (A).
