background image

KTI-63131B 2 

02/22/21

This is the safety alert symbol. It is used to alert you to 
potential personal injury hazards. Obey all safety messages 
that follow this symbol to avoid possible injury or death.

             

 

IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING

BEFORE USING THIS DEVICE, READ THIS MANUAL COMPLETELY AND THOROUGHLY, UNDERSTAND ITS OPERATING  

PROCEDURES, SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS.

It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsibility of 
the device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost 
or not legible, contact K-Tool International for replacements. If the operator is not fluent in English, the product and safety instructions 
shall be read to and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making 
sure that the operator comprehends its contents.

THE NATURE OF HAZARDOUS SITUATIONS

The use of portable automotive lifting devices is subject to certain hazards that cannot be prevented by mechanical means, but only 
by the exercise of intelligence, care, and common sense. It is therefore essential to have owners and personnel involved in the use and 
operation of the equipment who are careful, competent, trained, and qualified in the safe operation of the equipment and its proper 
use. Examples of hazards are dropping, tipping or slipping of loads caused primarily by improperly securing loads, overloading, off-
centered loads, use on other than hard level surfaces, and using equipment for a purpose for which it was not designed.

METHODS TO AVOID HAZARDOUS SITUATIONS

 

•  Read, study, understand & follow all instructions before operating this device.

 

•  Inspect the jack before each use.  Do not use if damaged, altered, modified, in poor condition, leaking hydraulic fluid or unstable 

due to loose or missing components.  Make corrections before using.

 • 

Use only on a hard level surface capable of supporting load and free from obstructions so the jack is free to reposition itself during 

lifting and lowering operations.

 

•  Lift only on areas of the vehicle as specified by the vehicle manufacturer.

 

•  User and bystanders must wear eye protection that meets ANSI Z87.1 and OSHA standards.

 

•  Do not use jack beyond its rated capacity.  Do not shock load.

 • 

This is a lifting device only.  Immediately after lifting, support the vehicle with jack stands capable of sustaining the 

load before working on the vehicle.

 

•  Center load on saddle.  Be sure setup is stable before working on vehicle.

 

•  Do not move or dolly the vehicle while on the jack.

 

•  Do not use any materials that may serve as risers, spacers or extenders between the stock lifting saddle and the load.

 

•  Do not use any adaptors that replace the stock lifting saddle unless approved or supplied by the jack manufacturer.

 

•  Always lower the jack slowly and carefully.

 

•  Do not use (or modify) this product for any other purpose than that for which it was designed without consulting the manufac-

turer's authorized representative.

 

•  Failure to heed these warnings may result in serious or fatal personal injury and/or property damage.

        

WARNING:

 This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and

        birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov

.

CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS

Failure to read this manual completely and thoroughly, failure to understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS,  
MAINTENANCE INSTRUCTIONS and comply with them, and failure to comply with the METHODS TO AVOID HAZARDOUS  
SITUATIONS could cause accidents resulting in serious or fatal personal injury and/or property damage.

WARNING: Indicates a hazardous situation 
which, if not avoided, could result in death 
or serious injury.

WARNING

WARNING

WARNING

WARNING

WARNING INFORMATION

Содержание KTI-63131B














Отзывы: