KTI
-
63414A/KTI
-
63427A
4
TROUBLESHOOTING
PROBLEM: JACK WILL NOT LIFT RATED LOAD
POSSIBLE CAUSE:
The release valve is not closed.
ACTION:
Turn the valve clockwise tightly.
POSSIBLE CAUSE:
Fluid level low.
ACTION:
POSSIBLE CAUSE:
Pump seals and back-up ring defective.
ACTION:
Clean oil passages, replace seals and renew oil. (Must be serviced by qualified service center).
PROBLEM: JACK WILL NOT LIFT TO ITS FULL HEIGHT
POSSIBLE CAUSE:
Fluid level low.
ACTION:
POSSIBLE CAUSE:
The hydraulic system is filled with air.
ACTION:
Follow the instructions under Setup and Operating Instructions to purge air from hydraulic system.
PROBLEM: JACK WILL NOT LIFT SMOOTHLY OR JACK FEELS SPONGY
POSSIBLE CAUSE:
The hydraulic system is filled with air.
ACTION:
Follow the instructions under Setup and Operating Instructions to purge air from hydraulic system.
WARRANTY
K-Tool International warrants that all jacks and service-related equipment will be free from defects in material and workmanship for a
period of 2 years following the original date of purchase. This warranty is extended to the original retail purchaser only. If any jack or
service-related item proves to be defective during this period, it will be replaced or repaired, at K-Tool International’s option, without
charge. This warranty does not apply to damage from accident, overload, misuse or abuse, nor does it apply to any equipment which
has been altered or used with special attachments other than those recommended.
K-Tool
I
nternational HD and XD service-related equipment 2 Year Limited Warranty.
Michigan