INTRODUCTION
The K-Tech front fork piston kit has been designed as an upgrade to the
standard fork internals . The kit is manufactured in the UK using the
highest quality materials and processes available. The system provides
the rider greater feel and control over the standard equipment.
K-Tech Suspension Ltd products are manufactured to fit specific brands
and models. Under no circumstances should any K-Tech Suspension Ltd
products be fitted to an application other than that for which it has been
designed, tested and manufactured.
2
K-Tech Suspension Ltd recommend that this product is serviced every
10,000 miles of use. It is very important that this product is serviced by an
authorised dealer, as there are special tools required to guarantee correct
performance of this product. K-Tech Suspension Ltd cannot be held respon-
sible for any damage caused to/by the product if a service is overdue or
was not conducted by an authorised dealer.
www.ktechsuspension.com/service-centres-and-partners
SERVICE
1
RECOMMENDED SETTINGS
104mm
215cc Oil Amount
5wt.
6.5 N/mm
2 Turns
2 Turns
See Manufacturer’s Specification.
Fork stroke
Air gap/Oil level
Fork oil
Spring rate
Comp damping
Reb damping
Fork position
RECOMMENDED SETTINGS
FF PISTON KIT
All piston kits are supplied with the following parts:
2x 6.5N/mm springs
2x Stickers
SUPPLIED PARTS
