background image

 
OPERATION                   

 

Controls 

Always trun the hood ON before cooking in order to establish an air flow in the kitchen. After 

button) 

turing off the range, let the hood run for a few minutes to clear the air. 
 

tronic Button(Brighting words button and bl

 

Elec

ue ring 

 

1.  Power: When power-on ,the output is off ,and the machine is standby. 
2. 

light

  key Press the key once,the lamp is lit.Once more,the lamp put out,and this operation is 

culation. 

a cir

3. T

 

he Add key 

,also the switch that control power-on .The motor has three speed : low

medium

high. 

1) Press 

the 

key once,the motor start working,with its low speed(that the switch control the 

power-on,and the speed indicator is lit. 

2)  At the low speed,Press the 

key again to shift up to medium speed.Then the position 

indicator is lit. 

3) Press 

the 

key when the motor at its medium speed.It will be shift up to high speed.Then 

the 

  position indicator is lit,the 

  position indicator is put out. 

4)  when the motor at its high speed,prss the 

key again,the motor will work at its normal 

condition.Of course,working at its high speed. 

.  The Dec key

4

,also the switch that control the power-off. 

1) Press 

the 

key once ,the motor will shift down one level,Continully press the Dec key till 

the machine at no speed,then the switch control power-off.(the motor stop working),the 
speed indicator is put out. 

.  The Timer key

5

1)  The timer key is used for timing setting,when the motor or lamps are working.10min 

delay,the motor will be off work. 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 
 

 
 
 
 
 
 

 
 

Содержание K1012













Отзывы: