MOUNTING THE UNIVERSAL RAIN SENSOR RECEIVER
• Remove the Back Housing
from the Main Housing using
the side clips shown here .
• Mount the Back Housing
through the 3 mounting
holes utilizing the supplied
hardware (fig .3) .
• Once the Back Housing is
installed, attach the Main
Housing with the 2 side
clips (fig .3) .
• Take care to ensure the
supplied rubber wiring harness
grommet seals correctly against
the 2 halves of the housing .
PAIRING WITH THE WIRELESS RAIN SENSOR
Press and hold the PAIR button on the Universal Rain Sensor Receiver for
at least 3 seconds until the green PAIRED LED begins flashing rapidly (fig .4) .
Next, press and hold the MANUAL TEST PIN on the Wireless Rain/Freeze
Sensor for at least 3 seconds . The PAIRED and BATTERY LEDs will both
display solid in green upon successful pairing (fig .5) .
www.krain.com
08
Mounting Holes
Side Clips
FIGURE 4:
FIGURE 5:
FIGURE 3:
Pair Button
Manual Test Pin
