Document/Revision No. IM-EN-SDGEN2-BP 1.02 Effective: December 2, 2014
4
●
Use suitable type of steam for cleaning the prism. Dry saturated steam and 10-12 bar
(150-180 psi) are recommended.
●
Access to steam. The distance between the steam supply and the SD sensor system
should be considered for the length of steam piping.
●
Access to drain for steam trap condensate outlet.
●
Emergency shower and eye wash should be easily accessible. Water can also be used
for cleaning SDI2 valve lip seals and sensor after sensor removal.
●
Shut-off valve needs pressurized instrumentation air (5-10 bars / 70-150 psi).
●
Ensure connection to the power supply (110-230V AC).
If these conditions do not apply, please reconsider the intended location for your installation
or contact K-Patents.
2.2 Component Checklist
Before starting installation, make sure you have all the tools and components listed below.
NOTE:
Components 4 and 5 are connected by union nipple or piping not included in
the delivery.
System components included in K-Patents delivery:
