BTT001
3
■
Start to use
1、
Switching on/off the adaptor
Function Operation
indicator light
Turn on
Connect the adaptor with iPod
Indicator flashes quickly
Turn off
Take out the adaptor from iPod
Indicator light is off
Note
：
please operate your iPod if the adaptor dose not work.
2、
Pairing with Bluetooth devices
You can enjoy music wirelessly after pairing and connecting the adaptor
with Bluetooth receiver,. Before pairing, please make sure your
Bluetooth receiver supports A2DP profile. The steps are as follows:
1)
、
Keep the adaptor and your stereo Bluetooth receiver within 5 meters
2)
、
Turn on your Bluetooth receiver, and turn it to pairing mode.
3)
、
Connect the adaptor with iPod, make sure your iPod is on, the indicator
light will flash quickly..
4)
、
The adaptor will search and pair with the Bluetooth receiver
automatically..
5)
、
After successful connecting the adaptor indicator LED will flash slower
than before. At this time, play music in the iPod .
Note
：
●
The adaptor can pair with stereo Bluetooth receivers which PIN Nos. are “
0000
”
、
“
1234
”
、
“
7777
”or“
8888
”.
●
Connecting with the last paired device automatically when turn on the adaptor.So,.If
you want to pair with other devices, please turn off the current receiver, and then start to
pair with new device.
3
、
Music remote control
You can remote control last song
、
next song
、
pause
、
revert to play through
operating the Bluetooth receiver. This function needs your Bluetooth receiver
to support AVRCP(audio/video remote control) profile. Please refer to your
user manual of Bluetooth receiver for further information.
4
、
Indicator LED
Indicator LED
Status of adaptor
Blue LED flashes quickly
Pairing mode or disconnect with
Bluetooth device
Blue LED flashes every 2 second
connected with Bluetooth device