background image

 
 

NOTE: This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 
- Reorient or relocate the receiving antenna. 
- Increase the separation between the equipment and receiver. 
-Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected. 
-Consult the dealer or an experienced radio/TV technician for help 
 
Changes or modifications not expressly approved by the party 
responsible for compliance could void the user's authority to operate 
the equipment. 
 
This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions: 
(1) this device may not cause harmful interference, and 
(2) this device must accept any interference received, including 
interference that may cause undesired operation. 

 

 

 
 
 
 
 
 

Содержание BTH171Q

















Отзывы: