e. You can also fix the headset as a necklace with the cable management. It
is convenient and beautiful.
3. Pairing/connecting
1) Pairing headset with Bluetooth cell phone via Bluetooth
Prior to using the headset for the first time, you have to pair it with a
Bluetooth-enabled cell phone. The pairing procedures are subject to
different models of cell phones. Please refer to your cell phone user’s
manual for further information.
The general pairing procedures are as follows:
1)
Keep your headset turned off and within 1 meter of phone ;
2)
Press and hold
about 5 seconds until the red and blue LED flash
alternately, the headset enter into paring mode and emits “pairing”
3)
Activate your cell phone’s Bluetooth function and search for Bluetooth
devices within range, select “BTH132” from the list of devices shown
4)
After successful connecting, blue LED of headset flashes twice every 4
seconds and emits “Your headset is connected”
Remarks:
Pairing mode will last 2 minutes, the headset will back to standby mode
if the pairing failure.
If the pairing is not successful, turn off the headset and repeat the steps as
above. After successful pairing, the headset will connect to the last
connected device automatically.
When the headset is in standby mode and not connect with device, short
press any button of headset, it will try to connect to last connected
device.
5
