39
Power
1. GROUND/FREE switch (disconnects the ground of the input channels from chassis to avoid
ground loops)
2. Mains socket with integrated fuse holder (replace fuse only by type 2A slow blowing fuse
5 x 20 mm);
Attention:
use only the correct mains voltage 230 V AC
3. Power switch with control LED (If the mains LED does not shine, check your mains voltage and
/ or the fuse located in the mains connector);
Attention:
please pull down all volume controls
before switching on the VL 240 to avoid undesirable sound reproduction; set volume levels of
unused channels by zero, to avoid unnecessary background noise
Connections
4. LINE IN (XLR- jack F) balanced, 11. switches sensitivity between MIC and LINE of channel two
5. LINK out (XLR- jack M) balanced, to transfer the signal from channel one, without impact of
sound control
6. RCA (CINCH) input parallel to channel one, adapted for CD-player
7. LINE IN- jack balanced
Operation
8. LIMIT/PEAK indicator (if the LED constantly lights up, please reduce the gain for ensuring best
sound quality and avoiding damage on speaker chassis and electronic parts which may be caused
by operating the unit on critical output power by some time)
9. Volume control for each channel
10. Equalizer (bass and treble) for each channel
Connection of balanced and unbalanced signals:
Содержание VL 6 i
Страница 1: ...Bedienungsanleitung User Manual...
Страница 21: ...21 Notizen Notes...
Страница 41: ...41 Notes...
Страница 42: ...42...
