K.M.E. Versio VL340, Руководство по эксплуатации

Страница: 11 / 32

4.2.2 Button Lock
All mode buttons (labeled (2), (5), (8) in Illustration 2.2) can be locked to prevent undesired opera-
tion. To enable or disable the lock hold buttons (5) and (8) pressed until Channel 1 mode button
will light up again. By flashing following status information is displayed:
•
Locked
all buttons will flash red
•
Unlocking
all buttons will flash green
4.2.3 Automatic operating state storage
The VL3x0 will store the currently set input modes and the playback position of the USB Player
which makes setting these modes again after a power on / off cycle or power loss superfluous.
11
L
Precaution is demanded in case of enabled Phantom Power!
As the Phantom Power state is also affected by the operating state storage, you should always
ensure - b
efore switching on - there is no equipment connected to Channel 1 XLR that might be
damaged by applying Phantom Power! Please consult the manufacturers documentation as to
whether your equipment will tolerate Phantom Power.
Illustration 4.2: Locking / unlocking the buttons
CHANNEL 2 LINE OUT
SPLIT L/R
-
INSTRUMENT/LINE
I
I CONNECTION HELP
II
II
III
III
MIC
LINE MIC / LINE
a
r r
MIC
A-GIT
E-GIT
LINE / OTHER
-
G
Y
R :
:
:
:
:
G
Y
R :
:
: LINK CH 1
LINK CH 1+CH 2
MASTER POST