K.M.E. Versio SD 1, Руководство пользователя

Страница: 4 / 16

4
5. Connection And Control Panel
Power
1) Mains connector – PowerCon In (blue);
Note:
usage of the correct mains voltage of
90 - 250 V AC / 50 - 60 Hz
2) Ground/ Free switch – disconnects the ground of the input channels from chassis to avoid
ground loops
3) Power switch
Connections
4) Speaker Output – 2x Speakon NL 4 (2x 200 W @ 4 ohm (min. impedance), depending on
preset);
Note:
When connecting one or more passive loudspeakers please always take into
consideration their nominal load and impedance
5) Line In & Link Out - XLR balanced, analogue/ digital switchable, Link Out is only active
when the VSS 28 is powered on
6) Line In & Link Out - XLR balanced, analogue, Link Out is only active when the VSS 28 is
powered on
Operation
7) Menu Items – by using the three Menu Item buttons “Input“, “Mode“ and “Preset“ the
system setting can be changed (see 7.1)
8) SD Card slot – serves as an interface to load presets and firmware updates; it works with
an FAT format which can also be read and formatted on an usual PC (see 7.3)
Note:
only SD Cards in FAT32 format can be read.
9) System Volume Control (from - ∞ to +6 dB) or adjustable Limiter (from -24 dB to 0 dB) –
control can be adjusted with a suitable tool (see 7.2)
10) LED indicator – indicates the chosen settings and the operating status of the VSS 28
(see 7.1)