3
P
ersonal
P
rotection
/i
mPortant
i
nformation
Eye & Face Protection:
To
avoid eye injury, always
wear protective glasses
or face shield that meets
ANSI Z87+ Standards. Make sure no one can be
injured by flying objects or debris when using
tools or working on a component.
Read the Manual:
To avoid personal
injury, carefully read and understand
all instructions before attempting to
operate any equipment or tools. Do
not operate or work on a machine unless you read
and understand the instructions and warnings in
this and all other applicable manuals.
WARNING
WARNING
H
azard
a
voidance
Crushing Hazard:
The
K-Line® Engine Stand
is very heavy. Specific
weights are detailed
in this manual. Use
caution when moving the stand.
Inspect Equipment:
Inspect prior
to each use for dents, cracks, bends,
or worn parts. If damage is found,
discontinue use until inspected and
released by an approved inspector at
the dealership.
Pinch Point Hazard:
Personal injury
can result from improper use of this
tool and supporting of the load.
Keep body parts clear of moving
parts when lifting or rotating.
Fire/Smoking Hazard:
Clean up all leaked or
spilled fluids immediately.
Oil, fuel, or cleaning fluid
leaked or spilled onto any hot surfaces or electrical
components can cause a fire, resulting in personal
injury or death.
P
ersonal
P
rotection
/i
mPortant
i
nformation
WARNING
Slip & Fall Hazard:
Personal injury can
result from slips or falls.
DO NOT leave tools or
components laying around the work area. Clean
up all spilled fluids immediately. Use caution when
walking around the stand.
WARNING
H
azard
a
voidance
Additional Crushing
Hazard:
Personal
injury or death can
result from improper
use of this tool and
supporting of the load. Make sure the K-Line
Engine Stand is used only on a flat ,dry, level, and
hard surface. Do not work beneath any supported