4
5
s
pecIfIcAtIoNs
:
Part #
Description
Extension Arm Range
Chain
Grade(ASTM)
Load
Limit
KL30200
10,000 lb. Load
Leveler
36’’(914.4mm)-56’’(1422.4.4mm)
100
10,000 lb.
(4535.9 kg)
o
peRAtING
I
NstRuctIoNs
:
1. Hook the Load Leveler to a Crane or Hoist.
2. Attach the 2 Grade 100 Bearing Chain Assemblies to the component. Adjust the Extension Arms in
or out to keep the chain angle at a minimum.
3. Verify the Extension Arm Adjusting Bolts are securely fastened. See
Figure 1
DO NOT ever remove or replace any of the Load Bearing Bolts. See Figure 1.
Extension Arm Adjusting Bolts
Load Bearing Bolts
Tilt Adjustment
Screw
Extension Arm
Extension Arm
Figure 1
Lift the component enough to locate the center of balance. Level or adjust the angle of the Load
Leveler by hand using a wrench to turn either adjustment nut on the Tilt Adjustment Screw.
DO NOT
use an impact wrench.
CAUTION: To maintain stability and ensure the Grade 100 Load Bearing Chain Assemblies are
not stressed beyond their capacities.
- DO NOT adjust the Load Leveler to an angle greater than 30 degrees. See Figure 2.
- DO NOT not spread the Grade 100 Chains more than a total of 90 degrees for both
chains. See Figure 3.
Figure 2
Figure 3
Adjustment Nut
