K-array Thunder-KS, Руководство пользователя

Страница: 3 / 28

• Before connecting the loudspeakers to other devices, turn off the power
for all devices.
• Before turning the power on or off for all devices, set all volume levels to
minimum.
• Use only speaker cables for connecting speakers to the speaker
terminals. Be sure to observe the amplifier’s rated load impedance
particularly when connecting speakers in parallel. Connecting an
impedance load outside the amplifier’s rated range can damage the
apparatus.
• K-array cannot be held responsible for damage caused by improper use
of the loudspeakers.
• K-array will not shoulder any responsibilities for products modified
without prior authorization.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment must be installed and operated
in accordance with provided instructions and the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20
cm from all persons.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including
interference that may cause undesired operation.
CAUTION! Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
FCC Statement
FCC Radiation Exposure Statement
Canadian Statement
CE Statement
Trademark Notice
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions:
this device may not cause interference, and
this device must accept any interference, including interference that may
cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can
obtain Canadian information on RF exposure and compliance.
This equipment should be installed and operated with a minimum distance
of 20 centimeters between the radiator and your body.
K-array declares that this device is in compliance with applicable CE
standards and regulations. Before putting the device into operation,
please observe the respective country-specific regulations!
All trademarks are the property of their respective owners.
P R E L I M I N A R Y