K-array Redline KF12MT, Руководство пользователя, Страница: 9 / 25

KF12MT
REV. A 9
The device should be placed so that its location does not interfere with its proper cooling. For example, the device shouldn’t be placed
on beds, carpets or similar surfaces that could create an obstacle for the ventilation openings.
To reduce the risk of electric shock, unplug the power cord before connecting audio cables.
Set up your device on a stable retaining horizontal surface. If combined or mechanically connected with other products, always verify the
stability of the resulted system. Install the unit only in a location that can structurally support the weight of the unit, far away from people
who can interfere with the stability of the system. In case of outdoor installation, assure that the wind does not interfere with the system’s
stability, taking extra securities like chains, weights, ropes or any other certified anchoring systems. Doing otherwise may result in the
unit falling down, causing personal injury or property damage. The system should only be suspended by qualified personnel following safe
rigging practices. Secure fixings to the building structure are vital. To clarify any doubt you may have, seek help from architects, structural
engineers or other specialists.
Protect the power cord from being walked on or pinched.
This audio system is not intended for use in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic
control systems,or for any other uses where the failure of the audio system could lead to death, personal injury, or sever environmental
damage.
Do not make repairs yourself. Caution, risk of electric shock. Do not open the device, it contains potentially hazardous voltage. Never
attempt to disassemble, repair or modify the system yourself. Disassembling the unit may cause damage that is not covered under the
warranty. The device contains no user-serviceable parts. Repairs should only be performed by factory trained service personnel. Do not
plug the power cord if you suspect that your device needs service or repair.
Voltage requirement. Make sure that the supplied voltage stays within the specified range. Verify that your mains connection satisfies
the power ratings of the device.
Only connect the power supply to an appropriate power outlet.
Warning: since the device is a CLASS I apparatus, it must be only connected to an AC three-wire grounding outlet. If your outlet isn’t
grounded, contact a licensed electrician to replace it with a property grounded outlet.