K-array Lyzard-KZ14RI, Руководство пользователя, Страница: 10 / 19

8
Lyzard-KZ14R I
106mm
4,2in
28mm
1,1in
R1mm
0,04in
10mm
0,4in
11mm
0,4in
28mm
1,1in
22mm
0,9in
100mm
3,9in
Connecting
Lyzard-KZ14 I and Lyzard-KZ14R I are already pre-wired
with 5 m (16.4 ft) of ultra-thin speaker cable to be
directly connected to any K-array power amplifier.
K-array’s Kommander line of amplifiers featuring built-
in DSP will operate the Lyzard-KZ14 I and Lyzard-KZ14R I
at their optimized performance only with the proper
device preset: ensure to load the Lyzards device preset
Set the dedicated Lyzard-KZ1
DEVICE PRESET on the amplifier DSP
BEFORE applying any signal to the loudspeaker
The Lyzard-KZ1 ultra-thin speaker cable
should not be cut, jointed or soldered.
Instead of altering the wiring, replace the cable.
before applying any signal to the loudspeaker.
Before connecting the loudspeaker cable to the
amplifier:
• Ensure the amplifier’s minimum loading impedance
is matched, especially when connecting multiple
loudspeakers in parallel (see next paragraph);
• Ensure that the amplifier is switched off.
In case of cable replacement, for a cable run of up to
5 m (16.4 ft) use a wire gauge of 0,5 mm
2
(24 AWG) at
least.
For permanent installation a kit including a mounting
measure template, you can find it drawn inside the
packaging.
Follow these operating instructions:
1. 1 Find the proper wall’s position and depth.
2. 1 Make a hole in the wall using the template
provided, the deepest the recessed speaker is
(28mm with closed clips - ca 56mm with open/fold
clips - see the mechanical drawings for complete
details). To make a proper installation is better to
choose a plasterboard wall to drill, or saw with a
drywall saw.
3. 1 Set the metallic clips in place and gently fold
them behind to recess the speaker in the depth
of the hole.
4. 1 Then your KZ1R I installation is complete!
(fig.5. - 1 - 2 - 3 - 4)
Permanent recessed installation
With the recessed version, the mounting and installation
is thought to be easy and quick, with the new metallic
clips provided, perfect for recess the speaker in-walls.
So to install the recessed model permanently, following
the instructions carefully.
(fig.4. 1-2-3-4 steps in the pages above)
Lyzard-KZ14R I