K-array KU212, Руководство пользователя

Страница: 8 / 13

KU212 Ver. 1.0
8
8.1 K-2SPK ACCESSORY
This accessory is used to connect a Speakon cable to a KU212. It features two Speakon connectors wired
in parallel giving you the possibility to wire two or more KU212s in parallel using only Speakon cables.
The two wires situated at the back of the K-2SPK carry the signal from the 1+ contact (red wire) and
1- contact (black wire) of the Speakon connector. Wire them to the phoenix connector as shown in the
previous section (by default, they are wired in serial configuration). Use the four screws and the four
hexagonal spacers included to mount the K-2SPK on the KU212.
AMPLIFIER
OUTPUT
KU212 wired in parallel via Speakon cables