KRX PORTABLE SYSTEMS
Ver. 1.1
6
WARNING
•
Since the device is a CLASS I apparatus, it must be only connected to an AC
three-wire grounding outlet
.
If your outlet isn’t grounded, contact a licensed electrician to replace it with a property grounded
outlet.
•
To reduce the
risk of electric shock
, unplug the AC mains connector before installing audio cable.
Reconnect the power cord only after making all signal connections. Do not use the product if the
power cord is broken or frayed. Protect the power cord from being walked upon or pinched.
•
To completely disconnect this apparatus from the AC mains, disconnect the power supply cord plug
from the AC receptacle.
•
Avoiding hearing damage
. Professional loudspeakers are capable of producing extremely high sound
levels and should be used carefully. Never stand close to loudspeakers driven at high volume. Set
the volume to a safe level. You can adapt over time to a higher volume of sound that may sound
normal but can be damaging to your hearing. Hearing loss get worse every time you’re exposed to a
sound level of 90 dB or over for an extended period of time. If you experience ringing in your ears
or muffled speech, stop listening and have your hearing checked. The louder the volume, the less
time is required before your hearing could be affected.
•
Voltage requirement
. Make sure that the supplied voltage stays within the specified range. Verify that
your mains connection satisfies the power ratings of the device.
•
Only connect the power supply to an appropriate power outlet
•
Do not install the amplifier in wet or humid locations without using weather protection.
•
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not expose this apparatus to rain or moisture
and objects filled with liquids, such as vases, should not be placed on this apparatus.
•
The main plug of the power supply cord shall remain readily accessible.
CAUTION
•
Choking Hazards
. This device contains small parts, which may present a choking hazard to small
children. Keep the device and its accessories away from small children.
•
It is important that loudspeaker systems are used in a safe manner.
•
Do not make repairs yourself
. Caution, risk of electric shock. Do not open the device, it contains
potentially hazardous voltage. Never attempt to disassemble, repair or modify the system yourself.
Disassembling the unit may cause damage that is not covered under the warranty. The device
contains no user-serviceable parts.
Repairs should only be performed by factory trained service
personnel.
Do not plug the power cord in if you suspect that your device needs service or repair.
•
Sound distortion.
Do not operate speakers for an extended period of time with sound distortion. This
is an indication of malfunction, which in turn can generate heat and result in a fire.
•
Cooling.
During the use, it is normal for the device to get warm. The exterior of the device functions
as a cooling surface that transfers heat from inside the unit to the cooler air outside. The device
should be placed so that its location does not interfere with its proper cooling. For example, the
device shouldn’t be placed next to surfaces that can interfere with the properly cooling of the rear
panel’s radiators. When operating, the device should not be cover with additional protections.
