K-array Kommander-KA, Руководство пользователя

Страница: 11 / 28

Kommander-KA
User Guide
11
LED chart
In the rear panel, the input signal monitor LED and the output
signal monitor LED blink according to the presence of audio
signal at any input or output channel respectively. The input
and output signal monitor LEDs light on orange when the DSP is
limiting the signal level.
Front Panel
A. Input signal monitor LED
B. Output signal monitor LED
C. Status LED
D. Standby button
AC mains supply
The AC Main connection is made via the provided power cord:
1. insert the powerCon TRUE flying
connector into the inlet and then
rotate it clockwise;
2. connect the power plug of the
power cord to a mains socket
outlet.
Once properly plugged, the amplifier power up: the front and
back LEDs light on.
In order to set the amplifier unit in standby mode, keep pressed
the button on the front panel for 2
seconds. Keep pressed the button
for 2 seconds to wake up the
amplifier from standby mode.
The powerCon TRUE link (AC mains out) connector allows to
distribute the AC main power to other units according to their
power consumption. Please don’t exceed the limits stated on
the next tables.
Status LED
Color Mode Description
orange solid DSP software is loading
green solid System ready
blue solid User command: system identification
purple flashing Network parameters reset
Power
consumption*
Max number of cascade
powered equal units
Kommander-KA18 300 W 6x KA18
Kommander-KA28 800 W 2x KA28
Kommander-KA68 1200 W 2x KA28
Kommander-KA208 1200 W -
* Power Consumption at 4 Ω load, Pink noise, 1/8 rated power.
Power
consumption*
Max number of cascade
powered equal units
Kommander-KA14 I 400 W 4x KA14 I
Kommander-KA34 600 W 4x KA34
Kommander-KA104 1200 W 2x KA104
click!
A B C D