KO70
Acoustics
Speakers power handling
2 x 2000 W
(AES)
Max power
8000 W
1
Impedance
2 x 8
Ω
Frequency range
25 Hz - 120 Hz
SPL 1W/1mt
99.5 dB
2
Maximum SPL
136 dB continuous - 140 dB peak
Coverage
Omni
Crossover
Type
DSP controlled
Frequency
150 Hz
Transducers
2 x 21” Neodymium speakers with 6” voice coil
Audio Input
Connectors
1 X male + 1 X female parallel 3-pin balanced XLR
Wiring
Pin1 = ground / Pin2 = hot (+) / Pin3 = cold (-)
Remote control Input
Connectors
2 x female 8-pin RJ45
Power Input
Connectors
2 x PowerCon IN/OUT
Amplifi ers
Type
Class D - DSP controlled
Power
2x 3500 W @ 8
Ω
3
Protection
Dynamic limiter, over current, over temp, short circuits
AC power
Operating range
85-270 Vac 50-60 Hz with PFC (auto range)
P. nom
900 VA
Power factory
(1/2 max out/8
Ω
)
0.90
Minimum operation voltage
70 Vac
Maximum operation voltage
400 Vac
Physical
Dimensions
115 x 60 x 85 cm (45.28” x 23.62” x 33.46”)
Weight
78 Kg (171.96 lbs)
Notes for data
1. Maximum RMS applicable power for a musical signal, the
reference signal is the one proposed by EIAJ standard.
2. Measured @4 mt then scaled @1 mt
3. Amplifi er wattage rating is based on the maximum unclipped burst
sine wave RMS voltage that the amplifi er will produce into the
nominal load impedance.
New materials and design are introduced into existing products
without previous notice. Present systems may differ in some
respects from those presented in this brochure.
Accessories:
• K-OTR2:
Trolley
for KO70
• K-OCOVER2:
Cover for KO70