K-array KA10, Руководство пользователя

Страница: 7 / 22

WARNING
! !
• To reduce the risk of electric shock, disconnect the amplifier from the AC mains before installing audio
cable. Reconnect the power cord only after making all signal connections.
• Connect the amplifier to a two-pole, three wire grounding mains receptacle. The receptacle must be
connected to a fuse or circuit breaker. Connection to any other type of receptacle poses a shock hazard
and may violate local electrical codes.
• Do not install the amplifier in wet or humid locations without using weather protection.
• Do not allow water or any foreign object to get inside the amplifier. Do not put objects containing liquid
on, or near, the unit.
• To reduce the risk of overheating the amplifier, avoid exposing it to direct sunlight. Do not install the
unit near heat emitting appliances, such as a room heater or stove.
• No naked flame sources such like lighted candles should be placed on the device.
• The amplifier should be placed so that its location does not interfere with its proper ventilation. For
example, the appliance should not be situated on a bed, carpet, or similar surface that may create an
obstacle for the ventilation openings.
• CAUTION, RISK OF ELECTRIC SHOCK, DO NOT OPEN. This amplifier contains potentially
hazardous voltages. Do not attempt to disassemble the unit. The unit contains no user serviceable
parts. Repairs should be performed only by factory trained service personnel.
• Be sure that both voltage set by the selector on the device and AC Power have the same value.
5. SAFETY
!
!
!
!
!
!
!
!
!
Over-light weight
Compact design, 2U rack for 4 chs
Optical limiters
Electronically protected
Over-high efficiency
DSP on-board to drive all K-array products
Remote control and dedicated management software
Top quality components for outstandig performances
Aluminium frame
6. FEATURES
7