Do not touch lamp quartz envelope with bare hands. Burned-in fingerprints will reduce the useful life
period of the lamp. The lamp can be cleaned with a lint free cloth and alcohol.
Use care when installing a lamp. All contacts must be dry and free of contamination or corrosion.
Whenever the fixture has been transported, check to make sure the lamp is correctly seated in the lamp holder.
Use K5600 original spare parts and accessories only.
Important Safety Instructions
Caution High Voltage!
Before replacing the lamp, discsonnect lamp head from the ballast!
Caution High Heat!
Lamp and Beaker may be hot
!
Allow the lamp to cool down sufficiently before replacing.
Caution High Heat!
The housing and ballast can reach high temperatures.
Do not cover ventilation slots.
Never turn on the lamp head without the Beaker safety UV absorbing glass.
Do not operate if any damage of cables, plugs or lamp holder is detected.
Make sure the Ballast voltage selector switch (110V/220V) is set to the appropriate setting
before plugging in.
Caution:
Ballast must be grounded at all times! Check that the outlet has a reliable
grounding connection.
Do this not only for your safety but also for the reliability of Ballast.
Product Introduction and General Instructions
